- Obtain a Windows 98SE startup / emergency bootdiskette Download this self- extracting image and insert a blank floppy disk into your disk drive to make boot disks in Windows and Preparing for your Windows 2000 installation – Make the hard drive bootable and add CD-ROM support Insert your Windows 98 startup diskette and start/restart your computer Your computer will boot into DOS. When prompted for CD-ROM support, this is not necessary. Please continue.Command prompt will appear. Enter the command fdisk followed by [ENTER] key. Use this utility to delete all partitions on the disk drive. (Helps ensure this goes smoothly) The following link provides more information on how to use the FDISK utility:
Use the FDISK utility to partition the drive (You must create at least one Primary partition. FDISK will ask if you would like to make this partition active – YES!)
Restart the computer with the floppy disk inserted. The computer will boot into DOS again. Select “Enable CD-ROM
support” when available At the prompt, type format C: /s . This will format the new system partition and copy the necessary system files to make the drive bootable without the need of a floppy or CD-ROM Enter the command copy
D:\mscdex.exe C: .Enter the command copy A:\oakcdrom.sys C:
Enter edit C:\autoexec.bat . A blank, blue window should appear.
Type C:\MSCDEX.EXE /D:MSCD001 Press ALT and F keys at the same time to bring up a menu and use the arrows keys to select save . Repeat the ALT and F keys again to bring up the File menu, but this time exit.
Enter the command edit C:\config.sys
Type the following: DEVICE=C:\OAKCDROM.SYS /D:MSCD001
Save and exit as you did before Remove your floppy disk, insert the Windows CD and restart the computer. If you have a swappable floppy/CD-ROM, exchange the floppy for the CD drive and insert the Windows 2000 or XP CD. Restart. In order for DOS to detect the CD-ROM, it is very important that you have the CD in before your computer boots next time. Your hard drive is now bootable and will now have CD-ROM support
3.) Getting the Windows 2000 / XP setup started The Windows 98 logo will appear. Your computer should now boot into DOS at command prompt again. (C You will now have CD-ROM access (D
Enter the command D:\i386\winnt.exe *Instructions edited to exclude CD copy, although you may if you wish Now Windows 2000 setup will begin.. It will also perhaps nag you about smartdrive not being installed. Just ignore it and continue setup anyway. I’d tell you how, but it would make this thing even more complicated. It may also ask you about the location of the setup files. The default path is D:, which should be correct. Simply press [ENTER] if it asks.